.

Chevy Bolt EV Forum

Help Support Chevy Bolt EV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
In order to remove the bumper fascia (the cracked plastic part), you'd need to...


1 - Remove the Front Compartment Front Sight Shield

2 - Remove the Front Wheelhouse Liner Screws (not sure if you need to take the liner out completely)
3 - Remove the Front Bumper Fascia Wheel Opening Screws

4. Remove the Front Wheel Opening Molding Retainer
5. Remove the Front Wheel Opening Molding Clips
6. Partially remove the front wheel opening molding

7. Remove the Front Compartment Insulator Screws

8. Remove the Front Bumper Fascia Lower Bolts

9. Remove the Front Bumper Fascia Wheel Opening Bolts

10. Remove the Front Bumper Fascia Upper Bolts
11. Release the integral retainers at both fenders and headlamps.
12. Lift fascia off of headlamp retaining tabs, then Carefully pull the front bumper fascia outward to remove.
13. Disconnect all electrical connectors.
 
Back
Top