whiteshepherd
Posts: 2
Joined: Fri Apr 01, 2022 5:17 pm

Installing a AC120V pure sine wave inverter.

I'm installing a pure sine wave inverter in the cabin of my 2017 Bolt Premier. I need to run the battery cables under the hood and to the battery. What is the easiest way to route the power cables?
BoltEV
Posts: 429
Joined: Thu Feb 01, 2018 5:58 am

Re: Installing a AC120V pure sine wave inverter.

Not a good idea to run the required thickness of wires to hold those amps that long.
I have the EVExtend.com system installed in my Bolt EV but obviously not with the inverter attached during driving.
summit
Posts: 59
Joined: Mon Apr 04, 2016 11:13 pm

Re: Installing a AC120V pure sine wave inverter.

Best to keep the big DC line short and run the higher voltage 120vac long. Also mind the max wattage and size the DC cable accordingly. Has any one found a way to keep the Bolt on for longer than 90-minute ?
BoltEV
Posts: 429
Joined: Thu Feb 01, 2018 5:58 am

Re: Installing a AC120V pure sine wave inverter.

They say turn on, switch to Neutral, put brake on, exit thru passenger door

I have not tried it yet

I would also turn off lights, fan and defrost

Return to “Technical Discussions”