RyanZ
Posts: 18
Joined: Fri Mar 17, 2017 9:52 pm

BoltScreen

I picked up a BoltScreen from the guy that sells the Volt and Bolt Shelves, http://voltshelf.weebly.com/, and I thought I'd share some pictures.

Before installation:
IMG_20170512_122937.jpg
IMG_20170512_122937.jpg (238.17 KiB) Viewed 10328 times
That yellow orange smear is a paper wasp flying in front of the camera.

After:
IMG_20170512_125626.jpg
IMG_20170512_125626.jpg (218.05 KiB) Viewed 10328 times
jjr
Posts: 68
Joined: Thu Feb 18, 2016 2:25 pm

Re: BoltScreen

Thanks for sharing

I've never had issues with rocks etc being thrown into my radiator, but at least the solution looks good!
jjr
Posts: 68
Joined: Thu Feb 18, 2016 2:25 pm

Re: BoltScreen

p.s. How does it attach?
RyanZ
Posts: 18
Joined: Fri Mar 17, 2017 9:52 pm

Re: BoltScreen

It's just 4 black zip ties. You can kinda see them if you zoom in on the picture. There are two in the upper left and right corners and two under the license plate holder. They just snug it up against the existing grill.

I was mainly concerned about gravel building up in there and less about actual radiator damage. Since the bottom is basically sealed I figure anything that prevents additional debris getting in there can't hurt.

Return to “Pictures, Videos of the Bolt”