Recent content by timeToy

You are not the only one, and hopefully it is very simple loose bolt: http://www.mychevybolt.com/forum/viewtopic.php?f=2&t=6390&p=23833&hilit=steering#p23833 http://www.chevybolt.org/forum/178-2017-chevy-bolt-ev-issues-problems/10658-rattle-loose-feeling-steering.html#post129353

The tires are sold, thanks to everyone.

I went with the Riken Raptor ZR in OEM size. In San Diego we can run summer tires all year long. I have theses tires for roughly 1500 miles now. They are definitely way stickier than the stock tires, a much more secure feel overall, no more wheel spin during acceleration or aggressive...

I have swapped my stock Michelin Energy Saver A/S with Selfseal for some stickier tires, so I do not need the stock tires anymore, they were taken off at 3200 miles and all 4 tires and in great/like new condition. I understand they are rather hard to source, so this may help a few people with...

I have that exact same L2 charger and it DOES works fine with my Bolt EV. When I plug in my Bolt it DOESN'T clacks on/off loudly like yours seems to do. :idea: What is your charging rate on the i3? "Reduced"@20A or "Maximum"@32A? Maybe you are on "reduced"@20A so it works and when the Bolt is...

I have retrofitted my telescopic sun visor with working vanity lights: http://www.chevybolt.org/forum/11-exterior-interior/11922-telescopic-sun-visor-retrofit-working-vanity-lights.html#post141882 Here are the pictures for the overhead console:

I have tried it and it is working fine in the Bolt no specific issues to report.

Thanks a lot I will be very careful while taking it down and take a few pictures for other members. Now if GM Parts could deliver my mirrors before the week end that will be nice! UPS SurePost is so slow! I already tap into the mirror power for my dashcam...

I try to pull it out, I can see some clips, I disengage them, but the console doesn't get freed, it seems like something is still holding it? Someone has a picture of the console once removed? Are you sure there are not some screws behind the light? (like on Hondas for example)

I'm preparing the install the telescopic sun visors from the Volt and they come with vanity lights, I'd like to get them to work too, so I was planning on taping power from the overhead console. Unfortunately I do not know how to remove it. On the Volt it is held in place with 4 metal clips and...

This is indeed very annoying, the last selected source should stay enabled at the same volume level, EVEN if that source is not available (for instance Bluetooth)

My problem is that my phone do not fit in the wireless charging holder! Phones over 5.5" and in a case do not fit. I can fit the phone if I remove the rubber insert, but I'm afraid small object of fluids can drop in the center console plus the phone is moving around. There should be a slimier...